SCM420 Steel Round Bar, SCM420 Steel Round Bar Manufacturers, SCM420 Steel Suppliers, SCM420 Stockist, SCM420 Steel Dealers, SCM420 Steel Distributors, SCM420 Wholesalers, SCM420 Steel Traders, SCM420 Steel Square Distributors, SCM420 Steel Flat Bar, SCM420 Steel Companies Near me.
Grade Introduction:
SCM420 are alloy steel with high hardenability, temper brittleness, well weldability, less cold cracking tendency, good machinability, and great cold plastic strain. SCM420 generally is used for the parts which need high wear resistance, such as gears, shafts, high-pressure pipes, all kinds of fasteners, and so on. Carburizing structural steel.
Grade Application:
SCM420 case hardening alloy steels are widely used as gear components of all kinds and cogwheels. Open die steel forgings for general engineering purposes. Steel is available to supply different sizes of SCM420 steel and is able to supply modified SCM420 steel composition according to different requirements.
Equivalent grades:
GB 20CrMo, JIS SCM420, ASTM 4118, DIN 25CrMo4.
Addition to other grades:
MS, EN1A, EN3B, EN8, EN8D, EN9, EN19, EN24, EN31, EN32B, EN36C, EN41B, EN43B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13, CW-1, M2, M35, M42, 2714, SKD-11, P20, P20+S, P20+Ni, ASTM SA-36, ASTM SA-105, SAE 1018, SAE 1020, SAE 4140, SAE 8620, 16MNCR5, 20MNCR5, C20, C35, C40, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C, S355J2G3.
Our Supply Range:
Price List:
People also search as:
SCM420, SCM420 Steel, SCM420 Chemical composition, SCM420 Mechanical properties, SCM420 Equivalent Grades, SCM420 Steel plate, SCM420 Steel sheet, SCM420 Manufacturers, SCM420 Suppliers, SCM420 Dealers, SCM420 Stockist, SCM420 Distributors, SCM420 Wholesalers, SCM420 Traders.
Chemical composition:
The following table shows the chemical composition of SCM 420 steel:
Element
C
Mn
Si
P
S
Cr
Mo
Ni
Cu
Content (%)
0.18-0.23
0.60-0.85
0.15-0.35
0 ≦ 0.03
0 ≦ 0.03
0.90-1.20
0.15-0.30
0 ≦ 0.025
0 ≦ 0.03
Mechanical Properties:
Tensile strength σb (MPa): ≥ 885 (90)
Yield strength σs (MPa): ≥ 685 (70)
Elongation rate δ5 (%): ≥12
Section shrinkage ψ (%): ≥50
Impact energy Akv (J): ≥78
Impact toughness value αkv (J / cm²): ≥98 (10)
Hardness: ≤ 197HB
Hardness:
352-362
Heat treatment:
After the final heat treatment, there is a suitable drawing pass.
Hardening:
850~900℃ 1st Oil Cooling, 800~850℃ 2nd Oil Cooling.
Tempering:
150~200℃ Air Cooling.
Physical Properties:
  • Modulus of elasticity [103 x N/mm2]: 210
  • Density [g/cm3]: 7.85
  • Thermal conductivity [W/m.K]: 20.0
Thermal Properties:
Thermal conductivity [W/m.K]: 20.0
Forging Properties:
Hot forming temperature: 1100-850℃
Stress Relieving:
After the final cold drawing, there is a stress relief heat treatment in a controlled atmosphere.
Normalizing:
850~900℃ Air Cooling
Annealing:
850℃ Furnace Cooling
Density:
Density [g/cm3]: 7.85
Machinability:
Machinability (hot rolled and cold drawn, based on 100 machinability for AISI 1212 steel)
Welding:
The weldability of AISI 4118 steel is also very good, with excellent machining or cutting properties.
Supply Cities:
Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Tuticorin, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thanjavur, Trichy, Erode, Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchipuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijayawada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.
Metal Weight Calculator:
Shape:
Quantity:
Diameter:
Length:
Results
Calulated Weight: 0 Kgs / 0 Lbs