20MnCr5 Steel Round Bar, 20MnCr5 Steel Round Bar Manufacturers, 20MnCr5 Steel Suppliers, 20MnCr5 Stockist, 20MnCr5 Steel Dealers, 20MnCr5 Steel Distributors, 20MnCr5 Wholesalers, 20MnCr5 Steel Traders, 20MnCr5 Steel Square Distributors, 20MnCr5 Steel Flat Bar, 20MnCr5 Steel Companies Near me.
20MnCr5 steel is a low alloyed engineering case hardening steel for parts that require core tensile strength of 1000 – 1300 N/mm² and good wearing resistance.
This steel is carburizing steel used for components requiring high wear resistance surface, coupled with tough cores to resist shock loads and strength to give large service life.
20MnCr5|1.7147 gearing steel is widely used for a variety of applications in the used to the gearings in rotating machinery. Typical applications such as valve bodies, pumps, and fittings, the high load of the wheel, bolts, double-headed bolts, gears, internal combustion engine. Electric locomotives, machine tools, tractors, steel rolling equipment, boring machine, railway vehicle, and mining machinery transmission shaft on the steel ball, roller and shaft sleeve, etc.
ASTM A29/A29M DIN EN 10083/3 JIS G4053 DIN DIN/T DIN17210
Addition to other grades:
MS, EN1A, EN3B, EN8, EN8D, EN9, EN19, EN24, EN31, EN32B, EN36C, EN41B, EN43B, EN47, EN353, IS2062, 42Crmo4, HCHCR, OHNS, D2, D3, H-11, H-13, CW-1, M2, M35, M42, 2714, SKD-11, P20, P20+S, P20+Ni, SCM 420, ASTM SA-36, ASTM SA-105, SAE 1018, SAE 1020, SAE 4140, SAE 8620, 16MNCR5, C20, C35, C40, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C, S355J2G3.
Our Supply Range:
People also search as:
20MnCr5, 20MnCr5 Steel, 20MnCr5 Chemical composition, 20MnCr5 Mechanical properties, 20MnCr5 Equivalent Grades, 20MnCr5 steel plate, 20MnCr5 steel sheet, 20MnCr5 manufacturers, 20MnCr5 suppliers, 20MnCr5 dealers, 20MnCr5 Stockist, 20MnCr5 distributors, 20MnCr5 wholesalers, 20MnCr5 Traders.
The following table shows the chemical composition of 20MNCR5 steel:
The mechanical properties of annealed DIN 20MnCr5/1.7131 gearing steel (typical for steel) are outlined in the table below:
|Tensile||Yield||Bulk modulus||Shear modulus||Poisson’s ratio||Thermal conductivity|
When hardening 20MnCr5 heat treatment temperatures, including rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each steel component. Other considerations during heat treatment include the type of furnace, quenching medium and work piece transfer facilities. Please consult a heat treatment specialist for full guidance on heat treatment of 20MnCr5 steel.
Hardening °C – 780-820
Tempering °C – at least twice 150-200
|Thermal Conductivity at °C||20||350||700|
Hot Forming temperature: 1100-850 °C.
Stress-relief annealing °C – 550-600
850-880 °C, air cool
Heat to 650-700 oC.
|Density (×1000 kg/m3)||7.7-8.03||25|