EN353 Bright Bars, EN353 Bright Bar Manufacturers, EN353 Bright Bar Suppliers, EN353 Bright Bar Stockist, EN353 Bright Bar Dealers, EN353 Bright Bar Distributors, EN353 Bright Bar Wholesalers, EN353 Bright Bar Steel Traders, EN353 Steel Bright Bar Hexagon Distributors, EN353 Steel Bright Round Bar, EN353 Steel Bright Bar Companies Near me.
We are EN353 Steel Bright Round Bar manufacturers and we are manufacturing from prime quality billets and blooms. The range of EN353 Round Bars which we manufacture for our customers are of high quality and these round bars are used for making machinery and Auto components. These products have been made keeping in mind the quality parameters which have been set by the industry in the market. EN353 Round Bars are always supplied with the test certificates and can be supplied in bulk quantity as well as retail quantity as per customer’s requirements. EN353 alloy Steel round bars are supplied by us to various industries.
EN353 is a very high strength steel alloy which is hardened and tempered before supplying and has nickel, chromium, molybdenum making it high tensile steel strength, with good ductility and wear resistance. With relatively good impact properties at low temperatures, EN353 is also suitable for a variety of elevated temperature applications. EN353 round bars have good internal strength and high external strength, which makes it highly wear resistant. EN353 steel round bars offer good combination of ductility, strength and wear resistance. EN353 is a very high strength alloy engineering steel.
Acceptable for many automobile applications such as heavy duty gear, shaft, pinion, camshafts, gudgeon pins.
BRITISH BS 970:1991 815M17
BRITISH BS 970:1955 EN353
GERMAN DIN 20NiCrMo5
FRENCH AFNOR 20NCD5
SWEDISH SS 2523
EUROPEAN STEEL NAME 17NiCrMoS6-4
EUROPEAN STANDARD EN10277-4
Addition to other grades:
MS, EN1A, EN3B, EN8, EN8D, EN9, EN19, EN24, EN31, EN32B, EN36C, EN41B, EN43B, EN47, IS2062, 42Crmo4, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS, M2, M35, M42, 2714, SKD-11, P20, P20+S, P20+Ni, SCM 420, ASTM SA-36, ASTM SA-105, SAE 1018, SAE 1020, SAE 4140, SAE 8620, 16MNCR5, 20MNCR5, C20, C35, C40, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE 52100, S40C, S355J2G3.
Our Supply Range:
People also search as:
EN353, EN353 Bright Bar, EN353 Bright Bar Chemical composition, EN353 Bright Bar Mechanical properties, EN353 Bright Bar Equivalent Grades, EN353 Steel Bright Hexagon Bar, EN353 Bright Bar Manufactures, EN353 Bright Bar Suppliers, EN353 Bright Bar Dealers, EN353 Bright Bar Stockist, EN353 Bright Bar Distributors, EN353 Bright Bar Wholesalers, EN353 Bright Bar Traders.
The following table shows the chemical composition of EN353 steel:
|Content (%)||0.10-0.20||0.10-0.35||0.50-1.00||0.040 Max||0.040 Max||0.75-1.25||0.08-0.15||1.00-1.50|
|Brinell Rockwell Hardness||150-200|
Other Details of Property
|Ruling Section (mm)||150||150||100||65||65||30||30||25|
|Tensile Strength (MPa)||680/720||690/850||770/930||850/ 1000||930/ 1080||1000/1160||1080/1240||1280|
|Yield Stress (MPa)||440/480||480||570||665||740||835||895||1050|
|Elongation (% Min)||22||15||15||13||12||12||10||10|
|ISO V Impact (Joule)||30||30||30||30||25||25||22||7|
|Hardness (Brinell)||190/210||201/255||223/277||248/ 302||269/ 321||293/ 341||311/ 375||363/415|
|Proof Stress (0.2%) if required (MPa, Min)||495||550||630||710||770||850||985|
HB – 270
The hardening treatment for most steels consists of heating the steel to a set temperature and then cooling it rapidly by plunging it into oil, water. EN8 and EN353 steel is an easily available and cheap material that is acceptable for heavy duty applications.
Hardening °C 780-820.
EN353 is re-heated to 780C – 820°C, holding until the temperature is uniform throughout the section, and then quenched in oil, Tempering must be done immediately while the component EN353 is still hand warm. Heat to 150C – 200°c , soak it for 1 – 2 hours / 25mm of section, and then cooled in still air. Hardness after Tempering : 62-64 HRC.
|Thermal Conductivity at °C||20||350||700|
EN353 steel round bars offer good combination of ductility, strength and wear resistance. EN353 is a very high strength alloy engineering steel.
150-200, cooled in furnace.
1st pre-heating °C:up to approx. 400 in an air-circulating furnace
2nd and 3rd : 780 and 805°C.
|DENSITY (G/CM 3)||8.08|
|DENSITY (LB/IN 3)||0.292|