S355J2G3

Grade Introduction:
We manufacture these using S355J2G3. This structural steel is non-alloy steel. EN 10025:1990 is the steel standard. The current standard for these steel is EN 10025-2:2004. These are thus tested at minus 20 centigrade to test its impact resistance. This universal corrosion resistance material is a widely popular grade for manufacturing.
Our steel thus exhibits excellent corrosion resistance. This can be seen in a variety of severe environments. Both reducing and oxidizing environments are not an issue for these steels. They can even resist high levels of chemicals including the most harsh and toxic ones. Nitric, organic, inorganic, sulphuric, acetic, formic, chlorides, hydrochloric acid, and phosphoric acid show no impact on these steels due to their exceptional resisting abilities. Also, they are good to work in stress corrosion cracking, crevice, and pitting environments.

Equivalent Grades

EN 10025-2 Steel Number DIN BS 970 1983 GOST JIS AFNOR UNI
S355J2G3 1.0570 ST52-3 150M19 17GS SM 490 E36-3 Fe 510

Addition to other grades

MS, EN1A, EN3B, EN8, EN8D, EN9, EN19, EN24, EN31, EN32B, EN36C, EN41B, EN43B, EN47, EN353, IS2062, 42Crmo4, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS, M2, M35, M42, DIN1.2714, P20, P20+S, P20+Ni, SCM420, ASTMSA-36, ASTMSA-105, SAE1018, SAE4140, SAE8620, 16MNCR5, 20MNCR5, C20, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.

Structural Application in

  • Freight cars
  • Transmission towers
  • Dump trucks
  • Cranes
  • Trailers
  • Bulldozers
  • Excavators
  • Forestry machine

Our Supply Range

We supply to automotive ancillaries and OEM customers. The products we manufacture are used as input for manufacturing of automotive and general engineering components. These components are further assembled into systems fitted in automobiles and other engineering applications.

Product Type Size Range
Forged Round Bars 140mm Dia to 850mm
Rolled Round Bars 16mm Dia and above
Forged Flat Bars Thickness: 32mm to 510mm, Width: 65mm to 1050mm
Rolled Flat Bars Thickness: 6mm to 110mm, Width: 25mm to 510mm

Chemical Composition

The following table shows the chemical composition of S355J2G3 steel:

Element C Si Mn P S Cr Al Cu
Content (%) 0.20 Max 0.55 Max 1.60 Max 0.035 Max 0.035 0.30 Max 0.30 Max 0.45 Max

Mechanical Properties

Elastic modulus 217 GPa @ 100 °C
Elongation A 17 – 22 % @ 20 °C
Elongation A80 14 – 18 % @ 20 °C
Elongation A80, transverse 12 – 16 % @ 20 °C
Elongation, transverse 17 – 20 % @ 20 °C
Poisson’s ratio 0.29 [-] @ 20 °C
Shear modulus 75 – 80 GPa @ 20 °C
Tensile strength 450 – 680 MPa @ 20 °C
Yield strength 275 – 355 MPa @ 20 °C

Physical Properties

Density – 7.83 g/cm³ at 20 °C

Thermal Properties

  • Coefficient of thermal expansion α – – > 1.08E-5 1/K at -100 °C
  • Thermal conductivity λ –> 12.9 mm²/s at -100 °C37.6 W/(m·K) at -100 °C
  • Thermal diffusivity αdiff –> 12.9 mm²/s at -100 °C

Supply Cities

Ambattur, Bangalore, Chennai, Coimbatore, Dindigul, Guindy, Madurai, Nellore, Hyderabad, Tirupur, Tuticorin, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Kanyakumari, Telangana, Salem, Thanjavur, Trichy, Erode, Vellore, Karur, Nagercoil, Kanchipuram, Karaikudi, Pudukottai, Nagapattinam.

People also search as

S355J2G3 Steel Round Bar, S355J2G3 Steel Round Bar Manufacturers, S355J2G3 Steel Suppliers, S355J2G3 Stockist, S355J2G3 Steel Dealers, S355J2G3 Steel Distributors, S355J2G3 Wholesalers, S355J2G3 Steel Traders, S355J2G3 Steel Square Distributors, S355J2G3 Steel Flat Bar, S355J2G3 Steel Companies Near me.

S355J2G3, S355J2G3 Steel, S355J2G3 Chemical composition, S355J2G3 Mechanical properties, S355J2G3 Equivalent Grades, S355J2G3 Steel plate, S355J2G3 Steel sheet, S355J2G3 Manufactures, S355J2G3 Suppliers, S355J2G3 Dealers, S355J2G3 Stockist, S355J2G3 Distributors, S355J2G3 Wholesalers, S355J2G3 Traders.