EN31

Grade Introduction:
We are EN31 Round Bar manufacturers and we are only manufacturing from prime quality billets and blooms. The range of EN31 Round Bars which we manufacture for our customers are of high quality and these round bars are used for making machinery and OEM Auto components. These products have been made keeping in mind the quality parameters that have been set by the industry in the market. EN31 Round Bars are always supplied with the test certificates and can be supplied in bulk quantity as well as retail quantity as per customers’ requirements. EN31 alloy Steel round bars are supplied by us to various industries.

EN31 is a very high strength steel alloy that is hardened and tempered before supplying and has nickel, chromium, molybdenum making its high tensile steel strength, with good ductility and wear resistance. With relatively good impact properties at low temperatures, EN31 is also suitable for a variety of elevated temperature applications. EN31 round bars have good internal strength and high external strength, which makes them highly wear-resistant. EN31 steel round bars offer a good combination of ductility, strength, and wear resistance. EN31 is a very high-strength alloy engineering steel.

Equivalent Grades

  • BRITISH BS 970:1991 535A99
  • BRITISH BS 970:1955 EN31
  • GERMAN DIN 100CR6
  • FRENCH AFNOR 100C6
  • SWEDISH SS 2258
  • AMERICAN SAE 52100

Grade Application

Typical applications for EN31 steel include taps, gauges, swaging dies, ejector pins, ball, and roller bearings. It is good quality steel for wear-resisting machine parts and for press tools that do not merit a more complex quality.

Addition to other grades

MS, EN1A, EN3B, EN8, EN8D, EN9, EN19, EN24, EN31, EN32B, EN36C, EN41B, EN43B, EN47, EN353, IS2062, 42Crmo4, HCHCR, D2, D3, H-11, H-13, CW-1, OHNS, M2, M35, M42, DIN1.2714, P20, P20+S, P20+Ni, SCM420, ASTMSA-36, ASTMSA-105, SAE1018, SAE4140, SAE8620, 16MNCR5, 20MNCR5, C20, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.

Our Supply Range

We supply to automotive ancillaries and OEM customers. The products we manufacture are used as input for manufacturing of automotive and general engineering components. These components are further assembled into systems fitted in automobiles and other engineering applications.

Product Type Size Range
Forged Round Bars 140mm Dia to 850mm
Rolled Round Bars 16mm Dia and above
Forged Flat Bars Thickness: 32mm to 510mm, Width: 65mm to 1050mm
Rolled Flat Bars Thickness: 6mm to 110mm, Width: 25mm to 510mm

Chemical Composition

The following table shows the chemical composition of EN31 steel:

Element
C
Si
Mn
P
S
Cr
Content (%)
0.95-1.10
0.10-0.35
0.40-0.70
0.040 Max
0.050 Max
1.20-1.60

Heat Treatment

Heat treatment temperatures, including the rate of heating, cooling, and soaking times will vary due to factors such as the shape and size of each EN31 component. Other considerations during the heat treatment process including the type of furnace, quenching medium, and workpiece transfer facilities.

Hardness

63HRC

Hardening

Heat slowly to the hardening temperature of 800-820°C. Maintain until thoroughly soaked through. Plenty of time must be given for this soaking and then quench in oil.

Thermal Properties

Properties
Metric
Imperial
Thermal expansion coefficient (@ 23-280°C/73.4- 36°F, annealed)
11.9 µm/m°C
6.61 µin/in°F
Thermal conductivity (typical steel)
46.6 W/mk
323 BTU in/hr.ft².°F

Forging Properties

Heat slowly and begin forging at 1000-1050°C. Allow sufficient time at the forging temperature for the steel to be thoroughly soaked through. Reheat as necessary and do not forge below 850°C. After forging EN31 steel, cool slowly preferably in a furnace.

Stress Relieving

When parts are to be heavily machined, stress-relieving will be beneficial prior to hardening. Heat the EN31 carefully to 700°C, soak well and allow to cool in air.

Welding

EN31 Alloy Steel Welding performance, Our production completely according to the EN31 Alloy Steel standards to meet the EN31 Alloy Steel Welding performance, can also according to the customer request, meet the requirements of customers of EN31 Alloy Steel Welding performance.

Density

7.81 g/cm3

Mechanical Properties

ELEMENT
OBJECTIVE
Tensile Strength
750 N/mm²
Yield Stress
450 N/mm²
Reduction of Area
45%
Elongation
30%
Modulus of elasticity
215 000 N/mm²
Density
7.8 Kg/m3
Hardness
63 HRC

Physical Properties

NAME OF MATERIAL
COMPOSITION IN % OF WEIGHT
THERMAL CONDUCTIVITY W/M-K
DENSITY KG/M^3
MELTING POINT
C
Mn Si Cr S P Mg
En-31 IS-103 Crl
1.5
0.52 0.22 1.3 0.05 0.05 –
46.6
7810
1540

Tempering

Temper according to the purpose for which the tools are required, generally between 150°C and 300°C. Soak well at the selected temperature and soak for at least one hour per 25mm of the total thickness. Cool slowly in the air.

Temperature [°C]
150
200
250
300
Hardness [HRc]
63-62
62-61
60-59
57-56

Normalizing

EN31 alloy bearing steel is heated at 816°C followed by quenching in oil. Before performing this process, it is subjected to normalizing heat treatment at 872°C followed by slowly cooling in order to reduce the machining stress.

Annealing

EN31 is usually supplied in the annealed and machinable conditions. Re-annealing will only be necessary if the steel has been forged or hardened. To anneal, heat the EN31 steel slowly to 800-810°C, soak well and allow it to cool in the furnace.

Machinability

EN31 steel is a potential member of the automobile industry, and achieving dimensional accuracy with outstanding surface characteristics is a challenging task while machining this alloy. The current investigations deal with wire electrical discharge machining (WEDM) of EN31 die steel and establish a fundamental understanding of the process parameters on micro-scale machined surface characteristics. WEDM parameters such as pulse on-time, servo voltage, wire feed, and wire tension are grouped in an efficient way to understand the influence of these parameters on edge roughness, kerf width, and cutting rate. The current study revealed that low pulse on-time and servo voltage decreased kerf width and edge roughness. However, the cutting rate decreased with pulse on-time but increased with servo voltage. Wire tension and wire feed were found to have diverse effects on the response parameters. While edge roughness varied inversely, kerf width was directly proportional to the wire feed corresponding to lower wire tension.

Supply Cities

Ambattur, Bangalore, Chennai, Coimbatore, Dindigul, Guindy, Madurai, Nellore, Hyderabad, Tirupur, Tuticorin, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Kanyakumari, Telangana, Salem, Thanjavur, Trichy, Erode, Vellore, Karur, Nagercoil, Kanchipuram, Karaikudi, Pudukottai, Nagapattinam.

People also search as

EN31 Steel Round Bar, EN31 Steel Round Bar Manufacturers, EN31 Steel Suppliers, EN31 Stockist, EN31 Steel Dealers, EN31 Steel Distributors, EN31 Wholesalers, EN31 Steel Traders, EN31 Steel Square Distributors, EN31 Steel Flat Bar, EN31 Steel Companies Near me.

EN31, EN31 Steel, EN31 Chemical composition, EN31 Mechanical properties, EN31 Equivalent Grades, EN31 Steel plate, EN31 Steel sheet, EN31 Manufacturers, EN31 Suppliers, EN31 Dealers, EN31 Stockist, EN31 Distributors, EN31 Wholesalers, EN31 Traders.