DIN 1.2714 Round Bars, DIN 1.2714 Round bar manufacturer, DIN 1.2714 Rods Supplier, DIN 1.2714 Stockiest, DIN 1.2714 Dealers, DIN 1.2714 Distributors, DIN 1.2714 Wholesalers, DIN 1.2714 Steel Traders, Din 1.2714 Steel Square Distributors, DIN 1.2714 Steel Flat Bar, DIN 1.2714 Steel Companies Near me.
 
Grade Introduction:
1.2714 is a German Hot work alloy steel material grade.it is shock resisting steel. it belong to DIN 17350 standard. Digital Grade material number W-Nr 1.2714, Metal Steel grade 56NiCrMoV7.  It is a die steel, use in extrusion molds, Hot Cast molds. like aluminum production, Aluminum cast mold. Our Tool Steel material 100 % ultrasonic tested with good price. Small size steel products make by hot rolled, large size steel products make by forging.
 
Grade Application:
1.2714 cold working tool steel is for general purpose tools and dies where greater toughness is required, but with some sacrifice of abrasion-resistance.
Typically used below applications:
  • spindles,
  • forming rolls,
  • punches,
  • blanking and forming dies,
  • trimmer dies,
  • clutch parts,
  • pawls,
  • bearings,
  • chucks parts,
  • rollers,
  • knuckle pins,
  • clutch pins,
  • shear blades
 
Equivalent grades:
USA
Germany
China  
Japan
France 
England
Italy
Poland 
Czechia 
Austria
Russia
Inter
DIN,WNr
GB
JIS
AFNOR
BS
UNI
PN
CSN
ONORM
GOST
ISO
L6
55NiCrMoV6
5CrNiMo 
SKT4
55NCDV7   
BH224-5  
44NiCrMoV7-               KU
WNL
19662
W501
5KHNM
55NiCrMoV7     
 
56NiCrMoV7 
       
56NiCrMoV7-KU
WNLV
19663
W502
5KHNV
 
 
Addition to other grades:
MS, EN1a, EN3b, EN8, EN8d, EN9, EN19, EN24, EN31, EN32b, EN36c, EN41b, EN43b, EN47, EN353, IS2062, 42Crmo4, HCHCR, D2, H-11, H-13, CW-1, OHNS, M2, M35, M42, 2714, SKD-11, P20, P20+s, P20+Ni, SCM 420, ASTM Sa-36, ASTM SA-105, SAE 1018, SAE 1020, SAE 4140, SAE 8620, 16MNCR5, 20MNCR5, C20, C35, C40, C45, C50, C60, CK45, 20C8, 40C8, 45C8, 55C8, C55MN75, SAE52100, S40C, S355J2G3.
 
Our Supply Range: 
 
Price List:
 
People also search as:
DIN 1.2714, DIN 1.2714 Steel, DIN 1.2714 Chemical composition, DIN 1.2714 Mechanical properties, DIN 1.2714 Equivalent Grades, DIN 1.2714 steel plate, DIN 1.2714 steel sheet, DIN 1.2714 manufactures, DIN 1.2714 suppliers, DIN 1.2714 dealers, DIN 1.2714 Stockiest, DIN 1.2714 distributors, DIN 1.2714 wholesalers, DIN 1.2714 Traders.
 
Chemical composition:
The following table shows the chemical composition of DIN 1.2714 steel:
Element
C
Si
Mn
Ni
P
S
Cr
Mo
V
Content (%)
0.5 – 0.6
0.1 – 0.4
0.6 – 0.9
1.5 – 1.8
0.03 Max
0.03 Max
0.8 – 1.2
0.35 – 0.55
0.05 – 0.15
 
Mechanical Properties: 
Hardness         
(HB)
Rp 0.2 Yield Strength
Rm Tensile Strength
Elongation         
K C V 20°C
Elastic modulus
MPa
ksi
MPa
ksi
%
J
GPa
ksi
376
1045
151
1270
184
10
40
205
29733
 
Hardness:
Annealling  255 HB max, Q+T: 58-38HRc, different hardness according different Tempering temperature.
 
Heat treatment:
Heat treatment temperatures, rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities.
 
Hardening:
Hardening temperature/℃: 840~870, Quenching in oil
 
Tempering:
Commonly used drawing temperature/℃: 400~650;  tempering after-hardening values /MPa|400℃: 1770;  tempering after-hardening values /MPa|500℃: 1570;  tempering after-hardening values /MPa|600℃: 1320;  tempering after-hardening values /MPa|650℃: 1180
 
Physical Properties:
  • Density: 7.85kg/m3
  • Thermal conductivity
  • Forging ratio: 4:1 Minimum
  • Microstructure
  • Magnetic
 
Thermal Properties:
 
Forging Properties:
For forging 1.2714 steel, Slowly Pre-heat, at Hot-working temperature/℃: 1050~850
 
Stress Reliving:
When tools made from 1.2714 steel are heavily machined or ground, the relief of internal strains is advisable before hardening to minimize the possibility of distortion. Stress relieving of this grade should be done after rough machining. To stress relieve, heat the component carefully to 600-650°C, allow a good soaking period, about two hours per 25mm of section. Cool in the furnace to 500°C then freely in air. Tools may then be finish machined before hardening.
 
Normalizing:
 
Annealing:
Annealing temperature/℃: 680~710; After the annealing, degree of hardness ≤HBS: 250
 
Density:
  • Density: 7.85kg/m3
 
Machine ability:
Machinability of tool steel L6 is very good. It rates 90% of the machinability of the W-group water hardening low alloy steels rated 100% as a baseline.
 
Welding:
 
Supply Cities:
Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Tuticorin, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thanjavur, Tirchy, Erode, Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchipuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijayawada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.
Call Now ButtonClick to Call Us