55C8 Steel Round Bar, 55C8 Steel Round Bar Manufacturers, 55C8 Steel Suppliers, 55C8 Stockist, 55C8 Steel Dealers, 55C8 Steel Distributors, 55C8 Wholesalers, 55C8 Steel Traders, 55C8 Steel Square Distributors, 55C8 Steel Flat Bar, 55C8 Steel Companies Near me.
 
Grade Introduction:
55C8 Carbon steels have carbon as the key alloying element in their composition. They also contain up to 0.4% silicon and 1.2% manganese. In addition, the residual elements such as copper, molybdenum, aluminum, chromium, and nickel are present in these steels.
55C8 is a water resisting carbon steel whose wear resistance and hardenability are increased by the addition of a small quantity of chromium.
 
Grade Application:
  • Levers
  • Bolts
  • Nuts
  • Studs
 
Equivalent grades:
 
Addition to other grades:
MS, EN1A, EN3B, EN8, EN8D, EN9, EN19, EN24, EN31, EN32B, EN36C, EN41B, EN43B, EN47, EN353, IS2062, 42Crmo4, OHNS, HCHCR, D2, D3, H-11, H-13, CW-1, M2, M35, M42, 2714, SKD-11, P20, P20+S, P20+Ni, SCM 420, ASTM SA-36, ASTM SA-105, SAE 1018, SAE 1020, SAE 4140, SAE 8620, 16MNCR5, 20MNCR5, C20, C35, C40, C45, C50, C60, CK45, 20C8, 40C8, 45C8, C55MN75, SAE 52100, S40C, S355J2G3.
 
Our Supply Range:
 
Price List:
 
People also search as:
55C8, 55C8 Steel, 55C8 Chemical composition, 55C8 Mechanical properties, 55C8 Equivalent Grades, 55C8 Steel plate, 55C8 Steel sheet, 55C8 Manufactures, 55C8 Suppliers, 55C8 Dealers, 55C8 Stockist, 55C8 Distributors, 55C8 Wholesalers, 55C8 Traders.
 
Chemical composition:
The following table shows the chemical composition of 55C8 steel:
Element
C
Mn
Si
S
P
Content (%)
0.310 – 0.380
0.60 – 0.90
98.63 – 99.09
0.050 Max
0.040 Max
 
Mechanical Properties:
PROPERTIES
METRIC
IMPERIAL
Tensile strength, ultimate
585 MPa
84800 psi
Tensile strength, yield
370 MPa
53700 psi
Modulus of elasticity
190-210 GPa
29700-30458 ksi
Bulk modulus (typical for steel)
140 GPa
20300 ksi
Bulk modulus (typical for steel)
140 GPa
20300 ksi
Shear modulus (typical for steel)
80 GPa
11600 ksi
Poissons ratio
0.27-0.30
0.27-0.30
Elongation at break (in 50 mm)
0.3
0.3
Reduction of area
0.53
0.53
Hardness, Brinell
183
183
Hardness, Knoop (converted from Brinell hardness)
204
204
Hardness, Rockwell B (converted from Brinell hardness)
89
89
Hardness, Vickers (converted from Brinell hardness)
192
192
Machinability (based on AISI 1212 steel. as 100 machinability)
65
65
 
Hardness:
 
Heat treatment:
 
Hardening:
 
Tempering:
 
Physical Properties:
PROPERTIES
METRIC
IMPERIAL
Density
7.85 g/cm 3
0.284 lb/in 3
 
Thermal Properties:
THERMAL PROPERTIES
METRIC
IMPERIAL
Thermal expansion co-efficient (@20°C/68°F)
11 µm/m°C
6.11 µin/in°F
Thermal conductivity
51.9 W/mK
360 BTU in/hr.ft 2 .°F
 
Forging Properties:
 
Stress Reliving:
 
Normalizing:
 
Annealing:
 
Density:
 
Machinability:
 
Welding:
 
Supply Cities:
Ahmedabad, Amaravathi, Ambattur, Bangalore, Belgaum, Chennai, Chittoor, Coimbatore, Dindigul, Mysore, Nellore, Hyderabad, Kochi, Mangalore, Tirupur, Tuticorin, Madurai, Andhra Pradesh, Karnataka, Puducherry, Kerala, Tamil Nadu, Telangana, Salem, Thanjavur, Trichy, Erode, Vellore, Ranipet, Sivakasi, Karur, Hosur, Nagercoil, Kanchipuram, Karaikudi, Neyveli, Cuddalore, Kumbakonam, Thiruvannamalai, Pollachi, Rajapalayam, Gudiyatham, Pudukottai, Vaniyambadi, Ambur, Nagapattinam, Trivandrum, Vijayawada, Guntur, Thirupathi, Nazarathpet, Kakinada, Kurnool, Kadapa, Nizamabad, Mahabubnagar, Karimnagar.
Call Now ButtonClick to Call Us